The 
LINSINGER Multi-Cut tube cut-off machine MC3 revolutionizes the tube cutting with Ø between 150 and 660 mm. The stationary tube cut-off machine MC3 is suited particularly for the sampling of tubes respective endcuts, which is deployed both for welded tubes and seamless tube mills. 
LINSINGER Multi-Cut tube cut-off machine MC3 revolutionizes the tube cutting with Ø between 150 and 660 mm. The stationary tube cut-off machine MC3 is suited particularly for the sampling of tubes respective endcuts, which is deployed both for welded tubes and seamless tube mills. It possesses three smaller circular saws, which are fixed on a radial revolvable disc and delivers a clean, ready for sale cut. Considerable shorter length of cycle results with the simultaneous engagement of all three saws in the tube and the afterwards rotation about 120°; so the pure cutting time for a P110 steel tube of the dimension 244 x 13.5 mm is about eight seconds. 
Another essential advantage: If one sawing station fails, with reduced line speed the tube line operation can be continued with the remaining stations.
Furthermore the cutting time can be synchronized optimally to the sawblades, which benefits enormous to the cost effectiveness of the machine.
• Minimal tooling costs by disposable-sawblades with Linsinger Multi-Cut machines
• Fully automated tool changing: pit stop in record time
• Multi-Cut is more economical than any other system